• M Press
  • Borusan
  • Comer
  • Fastclamp
  • Genebre
  • Mech
  • Cayirova Boru
  • TLV

EN 1092-1 Flanges

DIN or Metric Flanges to EN 1092-1:2013 were previously metric flanges to BS 4504 and were meant to replace British Standard imperial flanges as long ago as 1969, now clearly the old BS10 imperial flange is still available even in the 21st Century but aren’t commonly used. The range of EN 1092-1 flanges comes in many guises and materials, here at Besseges (VTF) Ltd we offer this product range in carbon steel, galvanised steel and stainless steel. Many businesses buy them in steel plate form as slip on and blank versions in various pressure ranges from PN6 through to PN16 and PN40 and in sizes from 15mm (1/2”) to 600mm (24”) available on the shelf or on a relatively short lead time. For more information on all we have to offer in EN 1092-1 flanges or any other flange type please continue reading this latest Blog or contact our knowledgeable sales team.

EN 1092-1 Flanges

EN 1092-1 Flanges for Welding

Welding EN 1092-1 flanges are as we previously stated available as plate type and forged flanges. Plate flanges in this specification have a raised face on the slip on flanges and a flat face on blank flanges, for sealing purposes the raised face flange requires an inside bolt circle gasket although some businesses specify full faced gaskets despite the fact it will only seal on the portion of gasket covering the raised face, this is usually done so the gasket is lined up correctly using the bolt holes as a guide. Flange Gaskets are available from stock in the flange sizes specified and in natural rubber, Novus 21 non asbestos, graphite coated, spiral wound, PTFE envelopes and brass. Some materials are only available in limited sizes please contact us for more information. Forged flanges to EN 1092-1 are available from stock although forged blank flanges in this specification are not available unless specially ordered, these would be manufactured from ASME (ANSI) castings on special order, forged slip on bossed EN 1092-1 flanges are available from stock with test certificates depending on your specific requirements as 3.1b certification is not always available on this product, please contact us for more information or to price your latest requirements for these or any other pipeline products.

EN1092-1 Flanges

EN 1092-1 Flanges Threaded

A range of threaded EN 1092-1 flanges are available in a black or galvanised finish from 15mm (1/2”) to 150mm (6”) nominal bore, all our flanges are threaded BSP and are manufactured to the highest possible standards. This product range is suitable for use with 65mm (2 ½”) tube with a 76.1mm OD and 150mm (6”) tube with a 165.1mm OD. All other pipe sizes are within the required tolerance to suit BSP pipe threads and gaskets are the same as we have already discussed in the previous paragraph. To download the latest flange tables for EN 1092-1 flanges please follow the high-lighted link. We have excellent stock availability on all these products and many more flanges in BS10 and ASME (ANSI) standards and look forward to working with your business now and in the future, to place an order or check our competitive prices please contact us today.

EN 1092-1 Flanges

Post a Comment

Leave a Reply

Your email address will not be published.