• M Press
  • Borusan
  • Comer
  • Fastclamp
  • Genebre
  • Mech
  • Cayirova Boru
  • TLV


Tag Archives: galvanised tube

Besseges (Valves, Tubes & Fittings) Ltd is 25 Years Old

October 1st 1988 was the first trading day of Besseges (Valves, Tubes & Fittings) Ltd, we were then located in James Howe Mill which is now a part of our Warehousing on Turner Lane Ashton under Lyne attached to our present building which was purpose built and completed in 1996. As a business we have […]

Besseges (Valves, Tubes & Fittings) Ltd is 25 Years Old

October 1st 1988 was the first trading day of Besseges (Valves, Tubes & Fittings) Ltd, we were then located in James Howe Mill which is now a part of our Warehousing on Turner Lane Ashton under Lyne attached to our present building which was purpose built and completed in 1996. As a business we have […]

Handrailing from Fastclamp in the home

Over the years we have seen many uses of the Fastclamp Handrailing product in a domestic setting; they have been used in conjunction with Galvanised Tube to (BS1387) BS EN 10255 to build many structures from Car Ports to climbing frames and even bed frames. The latest domestic trend is open storage rails for clothing, […]

Aluminium or Galvanised Tube for your Compressed Air Lines

At the present time every Compressor House seems to have jumped on the modular aluminium pipe system band wagon to carry your compressed air with slogans about speed of installation and it’s so much lighter than Galvanised Tube, but in the end does it offer you the solution or alternative that your Business was never […]

Handrailing by Fastclamp for the Industrial Look

Retail businesses are constantly looking for new ideas to attract customers into their shops and here at Besseges (Valves, Tubes & Fittings) Ltd we believe we have the product that can give your establishment that Industrial look with Fastclamp Handrailing Fittings that will bring in those shoppers you crave.

BS EN 10255:2004 Tube from Borusan & Yucel

Here at Besseges (Valves, Tubes & Fittings) Ltd we offer quality tube to BS EN 10255:2004 (BS1387:1985) from stock in sizes 8mm (1/4”) to 150mm (6”) nominal bore. All finishes are available in galvanised, red primer and self-colour finishes. Our principle manufacturers for this range of pipework are Borusan and Yucel and we are pleased […]

Burning issue for Manchester metal processor

We were asked to attend a Manchester based customer to discuss the installation of a Compressed Air Line to the new burners they had recently ordered.  Based on the volume of air available from the Compressor we were able to quote the correct size galvanised tube and supply the right pipe fittings and valves to reach round […]